-
flexvat.com
LittleRP Flexvat V3
Dupont FEP Film For 3d Printer Flexvats
80mm X 130mm Build Area Flexvat
Categories
Recent Posts
- The best of both worlds: Flexvat with raised edge vented acrylic FEP support plate
- Heated Build Plate For The Thing, 350mm X 350mm
- Flexvats, Build Plates And New Store
- The General Purpose Thing
- At The Store: Drumhead Flexvat Kit For The LittleRP
- Drumhead Flexvat Kit For The LittleRP
- Torque Wrench For Tightening Flexvat Vat Gaskets And Tensioning Bolts
- Drumhead Flexvat for the LittleRP 3D printer.
- Diagram of flexvat
- Flexvat tests: I think this is going to work out
- SLA 3D Printer “Drumhead“ FEP Flexvat
- Old school voltage regulation for my 3d printers dlp projector. To eliminate random lines in 3d printouts.
- 3d printer vat refresh update: Tilting vat type sla dlp projector 3d printer
- How I prevent failed printouts on my sla 3d printer
- PDMS vat floor refresh method for DLP projector based 3d printer. Maybe, possibly, could be…
- DLP projector SLA 3d printer. 3d print timelapse
- Setting up a new DLP projector for my 3d printer.
- Setting up a DLP projector based 3d printers build size and resolution for Creation Workshop
- 3d printing notes 2
- 3d prints done on the updated printer
- 3d printer rebuild
- 3d printer rebuild, the z axis and build plate
- 3d printer rebuild, the vat and tilt assembly
- 3d printer rebuild, software and electronics
- 3d printing notes 1
- Moved ProjectsInterestsAndEtcetera to a new web hosting provider
- 3d Printer Vat Refresh (lean mean grilling machine style)
- DLP 3d printer build details 1: Structure
- DLP 3d printer build details 0: preface to the build details
- Up And Running. News At Nine.
- Lurching Forward: 3d printer
- True Facts (Or Actual facts, Depending) Raccoon vs. Locomotive
- Conestoga, The Movie
- It’s going to be all robomagellan for the next two weeks or so
- Conestoga software/hardware work and testing for upcoming Robomagellan
- UV DLP Light Source, update of the update.
- UV LED DLP Projector update: new uv lamp assembly
- Robomagellan (Let’s not over-think this little problem)
- Goal Goal Goal…
- Busy couple of weeks
- I’m going to go over this ground once and then I’m going to leave it alone.
- Aligning Conestoga’s digital compass to the base (Conestoga)
- A few quick notes on the casio projector uv mod (3d printer)
- First Light, Casio projector uv mod. (3d printer)
- casio dlp projector mods
Archives
Monthly Archives: April 2017
The best of both worlds: Flexvat with raised edge vented acrylic FEP support plate
PDMS vs FEP Based 3D Printer Resin Vats Most “bottom up” dlp and sla resin based 3d printers use one of two materials as a release layer for peeling a part from the floor of the printers resin vat after a … Continue reading
Posted in 3d printing
Leave a comment