-
flexvat.com
LittleRP Flexvat V3
Dupont FEP Film For 3d Printer Flexvats
80mm X 130mm Build Area Flexvat
Categories
Recent Posts
- Cool Breeze Alpha, a generic 3D resin printer frame
- The best of both worlds: Flexvat with raised edge vented acrylic FEP support plate
- Heated Build Plate For The Thing, 350mm X 350mm
- Flexvats, Build Plates And New Store
- The General Purpose Thing
- At The Store: Drumhead Flexvat Kit For The LittleRP
- Drumhead Flexvat Kit For The LittleRP
- Torque Wrench For Tightening Flexvat Vat Gaskets And Tensioning Bolts
- Drumhead Flexvat for the LittleRP 3D printer.
- Diagram of flexvat
- Flexvat tests: I think this is going to work out
- SLA 3D Printer “Drumhead“ FEP Flexvat
- Old school voltage regulation for my 3d printers dlp projector. To eliminate random lines in 3d printouts.
- 3d printer vat refresh update: Tilting vat type sla dlp projector 3d printer
- How I prevent failed printouts on my sla 3d printer
- PDMS vat floor refresh method for DLP projector based 3d printer. Maybe, possibly, could be…
- DLP projector SLA 3d printer. 3d print timelapse
- Setting up a new DLP projector for my 3d printer.
- Setting up a DLP projector based 3d printers build size and resolution for Creation Workshop
- 3d printing notes 2
- 3d prints done on the updated printer
- 3d printer rebuild
- 3d printer rebuild, the z axis and build plate
- 3d printer rebuild, the vat and tilt assembly
- 3d printer rebuild, software and electronics
- 3d printing notes 1
- Moved ProjectsInterestsAndEtcetera to a new web hosting provider
- 3d Printer Vat Refresh (lean mean grilling machine style)
- DLP 3d printer build details 1: Structure
- DLP 3d printer build details 0: preface to the build details
- Up And Running. News At Nine.
- Lurching Forward: 3d printer
- True Facts (Or Actual facts, Depending) Raccoon vs. Locomotive
- Conestoga, The Movie
- It’s going to be all robomagellan for the next two weeks or so
- Conestoga software/hardware work and testing for upcoming Robomagellan
- UV DLP Light Source, update of the update.
- UV LED DLP Projector update: new uv lamp assembly
- Robomagellan (Let’s not over-think this little problem)
- Goal Goal Goal…
- Busy couple of weeks
- I’m going to go over this ground once and then I’m going to leave it alone.
- Aligning Conestoga’s digital compass to the base (Conestoga)
- A few quick notes on the casio projector uv mod (3d printer)
- First Light, Casio projector uv mod. (3d printer)
Archives
Monthly Archives: April 2013
Aligning Conestoga’s digital compass to the base (Conestoga)
The first robomagellan competition is in a few weeks so I’m working on conestoga quite a bit these days. One of the issues I needed to resolve for conestoga was aligning the robot base and the digital compass on the … Continue reading
Posted in Conestoga and Robomagellan
Leave a comment
A few quick notes on the casio projector uv mod (3d printer)
some notes for those who may be wanting to do this mod: When disassembling the projector you have two types of flat cables, push in and connectors that have a latch. The latched connector have what looks like a black … Continue reading
Posted in 3d printing
Leave a comment
First Light, Casio projector uv mod. (3d printer)
First test with uv led in position. Even without having optimized the light path optics a lot of uv is being projected. This photo was taken in a well lit room, when I took the photo my camera immediately “stopped … Continue reading
Posted in 3d printing
Leave a comment
casio dlp projector mods
I think that the casio xj-a140 (purchased cheap without the blue leds and heatsink) may be one of the better dlp projectors for dlp based 3d printers IF you plan to modify it for use with a high output uv … Continue reading
Posted in 3d printing
Leave a comment
DLP projector red led assembly and uv led (3d printer)
I received the 20 watt uv led today and thought I would post some images of the red led assembly from the casio dlp projector and the uv led (only the blue led block was missing from the projector). I … Continue reading
Posted in 3d printing
Leave a comment